Schleuniger FibreOptic 7010

The low-cost FiberOptic 7010 cuts and removes the Kevlar material of fibre optic cables with complete accuracy to a remaining length between 3 and 60 mm.

Schleuniger Iguana Software

Iguana is a PC software for wire management of Schleuniger’s semi-automatic programmable stripping machines.

Schleuniger PreFeeder 60

The PreFeeder 60 prefeeding machine has been specially designed for use with fully automatic crimping machines such as the Schleuniger CrimpCenter models. It feeds wire and cable up to 6 mm².

Schleuniger PreFeeder 1000

The PreFeeder 1000 handles 300 mm reels weighing up to 20 kg and is ideal for tension-free prefeeding to an automatic wire and cable processing machine.

Schleuniger PreFeeder 1100

The PreFeeder 1100 is a solid and reliable benchtop electrical prefeeding machine for cable reels up to 20 kg and 457 mm in diameter.

Schleuniger PreFeeder 1000 MX

The PreFeeder 1000 MX handles 300 mm reels weighing up to 20 kg and has been specifically adapted for very thin wires ranging from 0.4 to 3.5 mm outer diameter.

Schleuniger PreFeeder 2200

The PreFeeder 2200 is a free-standing, electrical prefeeding machine designed to pull wire and cable from reels weighing up to 50 kg.

Schleuniger PreFeeder 2500

The PreFeeder 2500 is an active dereeler and the ideal feeding system for wire, small cables and tubing.

Schleuniger WireStacker 1000

The WireStacker 1000 is a passive wire stacking system with guide channel and collecting tray. It handles cable lengths up to 3 m and wires as small as 0.34 mm2. After processing each wire, the cut & strip machine sends a signal to the stacker initiating the dropping of the wire from the guide channel […]

Schleuniger WireStacker 3100

The WireStacker 3100 is a modular high-performance wire stacker for the precise, axial stacking of cables. The system consists of either a base element of 2.5 m or a base element with an extension to 5 m.