StripCrimp LPC Technical Specifications

Product Benefits

  • High precision & repeatability according to MIL spec 22520
  • Change-over of terminal type in < 5 minutes
  • Simple operation with PAWOPILOT handheld
  • Programmable sequence: zero cut, strip, crimp
  • Crimp depth step-less adjustable
Wire Cross Section 0.14 – 2.5 mm² (AWG 26 – 14)
Cylce Time < 2.5 s (for zero cut, stripping, terminal positioning, crimping)
Crimp Type 4 pin – 8-point crimp according to MIL spec 22520/1
Terminal Diameter (O.D.) max. 6 mm (0.24″)
Stripping Length 2 – 10 mm (0.08″ – 0.39″)
in increments of 0.01 mm (0.00039″)
Break-Out Length min. 25 mm (0.98″)
< 25 mm on request
Start Cycle sensor trigger (optional foot pedal)
Power Supply 115 – 230 V, 50/60 Hz, max. 0.3 kW
Pneumatic Connection min. 6 bar, oil-free, dry and filtered compressed air
Dimensions (W x D x H) 570 x 900 x 540 mm
(22.44″ x 35.43″ x 21.26″)
Weight 78 kg (172 lb)
CE-Compatibility The StripCrimp LPC fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Note Specifications are subject to change without notice. Exceptions may apply depending on application, wire and other variables.