CompactStrip 9200 RX Technical Specifications

Product Benefits

  • Very high precision level
  • Processing of very small micro coaxial cables
  • Processing of cables with very short overall lengths
  • For entire range of cable types and diameters withouth any blade change
  • Fully programmable
Back to Schleuniger CompactStrip 9200 RX

 

Wire / Cable Types
  • micro-coaxial cable
  • coaxial cable
  • discrete wire
Max. Cable Outer Diameter 3.6 mm
Min. Conductor Diameter 0.15 mm / AWG 36
Diameter Increments 0.01 mm
Cable Length Minimum 18 mm + stripping length
Maximum 1000 m
Max. Stripping Length
Left side: 6 mm
with special guide 8 mm
Right side: 999.9 mm
Max. Pull-Off Length
Left side: 6 mm
with special guide 8 mm
Right side: 8 mm
without guide 11 mm
depending on cable
Length Increments 0.05 mm
Transport Speed Up to 1 m/s
Production Rate Approx. 900 cables / hour with a 3 step strip on both ends
(depending on cable type and programming)
Interfaces Wire markers, prefeeders, wire stackers, cable coilers, robotic interface, RS 232, CAN, parallel (Centronics) printer port
Air Pressure 0.5 – 0.7 Mpa (5 – 7 bar)
Power Supply 95 – 132 VAC / 190 – 264 VAC
47 – 64 Hz
600 VA
Noise Level < 75 db (A)
Dimensions (L x W x H) 660 x 580 x 400 mm
Weight ca. 65 kg
CE-Compatibility The CompactStrip 9200 RX fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Note Specifications are subject to change without notice. Exceptions may apply depending on application, wire and other variables.

 

Back to Schleuniger CompactStrip 9200 RX