GLW MC25 Strip & Crimp

Efficient processing of tape-mounted insulated wire end sleeves

• The MC 25 processes wire end sleeves with a cross section of 0.5 to 2.5 square millimetres and a standard length of 8 mm.

• You can change the applicatior for the diameter of the sleeves in a matter of seconds without any additional tools. Just snap it in and off you go!

• All applicators are clearly arranged in a kit that comes with the crimper.

• Reliable operation thanks to an advanced microprocessor-controlled cam drive.

• The stripping unit is fitted with V-blades. It can be used for most commercially available conductors.

• Tape-mounted wire end sleeves are fed into the machine via a dispenser fitted to its right side.