Conductor Cross Section |
HeavyCrimper PR/PS: |
up to 35 mm² (2 AWG) |
HeavyCrimper XL: |
up to 50 mm² (1/0 AWG) |
|
Press Stroke |
HeavyCrimper PR/PS: |
40 – 44 mm (1.575″ – 1.732″) |
HeavyCrimper XL: |
44 – 50 mm (1.732″ – 1.969″) |
|
Feed Stroke |
HeavyCrimper PR/PS: |
1 – 70 mm (0.039″ – 2.756″) |
HeavyCrimper XL: |
n/a |
|
Binder Transport |
HeavyCrimper PR: |
End feed, pneumatic
(min. 6 Bar, unoiled) |
HeavyCrimper PS: |
Side feed, pneumatic
(min. 6 Bar, unoiled) |
HeavyCrimper XL: |
n/a |
|
Crimp Height Adjustment |
in increments of 0.02 mm (0.0008″) |
Height Closed (UT) |
HeavyCrimper PR/PS: |
158.38 mm (6.235″) |
HeavyCrimper XL: |
182.98 mm (7.204″) |
|
Processing of not Fixed Barrels |
HeavyCrimper PR/PS: |
n/a |
HeavyCrimper XL: |
possible |
|
Dimensions
(Bx W x L) |
HeavyCrimper PR: |
110 x 310 x 180 mm
(4.3″ x 12.2″ x 7.1″) |
HeavyCrimper PS: |
310 x 110 x 180 mm
(12.2″ x 4.3″ x 7.1″) |
HeavyCrimper XL: |
160 x 140 x 183 mm
(6.2″ x 5.5″ x 7.2″) |
|
Weight |
HeavyCrimper PR/PS: |
11 kg (24 lbs.) |
HeavyCrimper XL: |
12 kg (26 lbs.) |
|
Type of Base Plate |
HeavyCrimper PR/PS: |
Standard 3-point clamping base and
T-ram mounting system |
HeavyCrimper XL: |
2-point clamping base and
T-ram mounting system |
|
CE-Compatibility |
The described applicators are not independently functional in this form. Proper operation is only possible on CE-conform machines. |
Note |
Specifications are subject to change without notice. Exceptions may apply depending on application, wire and other variables. |