Uni-A Technical Specifications

Back to Crimp Applicators
Wire Range 0.08 – 6 mm² (28 – 10 AWG)
Feeding Method Mechanical / Pneumatic
Stroke 40 or 30 mm (1.57″ or 1.18″)
other strokes available on request
Crimp Height Adjustment
Max.: 1 mm (0.04″)
Increments: 0.02 mm (0.0008″)
Insulation Crimp Height Adjustment
Max.: 2 mm (0.08″)
Increments: 0.1 mm (0.004″)
Feed
Min.: 1 mm (0.04″)
Max.: 30 mm (1.18″) – from 25 mm (0.98″) we recommend a pneumatic feed
Pitch: step-less
Feed Brake Pressure Adjustable
Dimensions
(W x D x H)
Uni-A left side feed 190 x 120 x 175 mm
(7.5″ x 4.7″ x 6.9″)
Uni-A rear feed 75 x 190x 175 mm
(3″ x 7.5″ x 6.9″)
Weight

2.7 kg – 3.5 kg (6 – 7.8 lbs.)
Type of Base Plate 3 point quick change system
CE-Compatibility The Uni-A crimp applicators fully comply with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Note Specifications are subject to change without notice. Exceptions may apply depending on application, wire and other variables.

 

 

Back to Crimp Applicators