Pull Tester 20 Technical Specifications

Product Benefits

  • Speed controlled motor for consistent pull rates
  • Simple LCD display for easy programming & reading
  • Repeatable & accurate data
  • Versatile terminal (crimp) holder
  • RS 232 interface for curve analysis & statistics with optional WinCrimp PC software
Measuring Range Up to 500 N (110 lb.)
Units of Measure Newton (N), kilopound (Kp), pound (lb.)
Applied Force Accuracy 0.4% of full scale
Operating Temperature 0 – 50┬░C
Max. Stroke 48 mm (1.89″)
Pulling Rates
PullTester 20-25: 25 or 50 mm/min (0.98″ or 1.97″/min)
PullTester 20-50: 50 or 100 mm/min (1.97″ or 3.94″/min)
PullTester 20-TCP *: 50 or 100 mm/min (1.97″ or 3.94″/min)


Pulling Mode Pull + Break (normal pull test until wire breaks out)
Device Data Memory Sending maximum pull force value to PC or serial printer
Monitoring Device display output; optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis for evaluation with download possibility of Microsoft® Excel software
Setting Protection IP 20
Display LCD 4-digit
Print Capabilites Can be connected either to printer and / or via PC with WinCrimp software through RS 232 interface (without PullTester 20-TCP *)
Network Possibility of connecting one device only. Can be combined with crimp force monitor and crimp-height measurements device via WinCrimp software
PullTester 20-25 / PullTester 20-50: RS 232
PullTester 20-TCP *: TCP/IP


Motor Motor 24 VDC
Power Supply 24 VDC
Dimensions (L x W x H) 340 x 185 x 140 mm
(13.39″ x 7.28″ x 5.51″)
Weight Approximately 5 kg (11.02 lb.)
CE-Compatibility The PullTester 20-25, PullTester 20-50 and PullTester 20-TCP fully comply with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Note Specifications are subject to change without notice.