Pull Tester 25 Technical Specifications

Product Benefits

  • Speed controlled motor for consistent pull rates
  • Simple LCD display for easy programming & reading
  • Repeatable & accurate data
  • Versatile terminal (crimp) holder
  • RS 232 interface for curve analysis & statistics with optional WinCrimp PC software
Measuring Range Up to 500 N or 1000 N (110 or 220 lb.)
other variations possible
Units of Measure Newton (N), kilopound (Kp), pound (lb.)
Applied Force Accuracy 0.2% of full scale
Max. Stroke 43 mm (1.69″)
Pull Rates
US version: 25 or 50 mm/min (1″ or 2″/min)
European version: 50 or 100 mm/min (1.96″ or 3.9″/min)


Pulling Modes Pull + Break (normal pull test until wire breaks out)
Device Data Memory Not available
Monitoring Device display output; optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis for evaluation with download possibility of Microsoft® Excel software
Setting Protection IP 20
Display LCD 6-digit
Print Capabilites Can be connected either to printer and / or via PC with WinCrimp software through RS 232 interface
Network Possibility of connecting one device only. Can be combined with crimp force monitor and crimp-height measurements device via WinCrimp software.
Interface RS 232
Motor Motor 24 VDC
Power Supply 24 VDC
Dimensions (L x W x H) 180 x 130 x 380 mm
(7″ x 5″ x 15″)
Weight Approximately 8 kg (18 lbs.)
CE-Compatibility The PullTester 25 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Note Specifications are subject to change without notice.