| Measuring Range |
Up to 2’000 N or 5’000 N
(440 or 1’100 lb.)
other variations possible |
Up to 5’000 N or 10’000 N
(1’100 or 2’200 lb.)
other variations possible |
|
| Units of Measure |
Newton (N), kilopound (Kp), pound (lb.) |
| Applied Force Accuracy |
0.2% of full scale |
| Max. Stroke |
80 mm (3.15″) |
| Pull Rates |
50 or 100 mm / min
(2″ or 4″ / min) |
| Pulling Modes |
| Pull + Break |
normal pull test until wire breaks out (destructive test) |
|
| Device Data Memory |
Not available |
| Monitoring |
Device display output; optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis for evaluation with download possibility to Microsoft® Excel software |
| Setting Protection |
IP 20 |
| Display |
LCD 6-digit |
| Print Capabilites |
Can be connected either to printer and / or via PC with WinCrimp software through RS 232 interface |
| Network |
Possibility of connecting one device only. Can be combined with crimp force monitor and crimp-height measurements device via WinCrimp software. |
| Interface |
RS 232 |
| Motor |
Motor 24 VDC |
| Power Supply |
240 VAC |
| Dimensions (L x W x H) |
640 x 400 x 300 mm
(25.2″ x 15.7″ x 11.8″) |
| Weight Approximately |
45 kg (100 lbs.) |
| CE-Compatibility |
The PullTester 27 and PullTester 27-10 fully comply with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Note |
Specifications are subject to change without notice. |
