Pull Tester 28 Technical Specifications

Product Benefits

  • Speed controlled motor provides extremely consistent readings
  • 3 pulling modes for destructive & non-destructive tests
  • Simple LCD display for easy programming and read out
  • Standard RS 232 interface for curve analysis and downloading test data
  • Networking capabilites
Measuring Range
Up to 2’000 N or 5’000 N
(440 or 1’100 lb.), adjustable
other variations possible
Up to 5’000 N or 10’000 N
(1’100 or 2’200 lb.), adjustable
other variations possible


Units of Measure Newton (N), kilopound (Kp), pound (lb.)
Applied Force Accuracy 0.2% of full scale
Max. Stroke 80 mm (3.15″)
Pull Rates 50, 75, 100 mm / min and high
(2″, 3″, 4″ / min and high)
Pulling Modes
Pull + Break normal pull test until wire breaks out (destructive test)
Pull + Hold pull to a specified force and hold for up to 120 sec (non-destructive test)
Pull + Return pull to a specified force and reduce (non-destructive test)


Device Data Memory Up to 48 jobs with 50 measurements in each job (2400 values)
Monitoring Device display output; optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis
Setting Protection IP 20
Display LCD 6-digit
Print Capabilites Can be connected either to printer and / or via PC with WinCrimp software through RS 232 interface
Network Possibility of connecting several devices. Can also be combined with crimp force monitor and crimp-height measurement device via WinCrimp software.
Interface RS 232
Motor Motor 24 VDC
Power Supply 240 VAC
Dimensions (L x W x H) 640 x 400 x 300 mm
(25.2″ x 15.7″ x 11.8″)
Weight Approximately 45 kg (100 lbs.)
CE-Compatibility The PullTester 28 and PullTester 28-10 fully comply with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Note Specifications are subject to change without notice.