CoaxStrip 6480 Technical Specifications

Product Benefits

  • Fast cycle times
  • User friendly interface
  • Cable diameter verification and cable end detection
  • High precision and reliability
  • 1,000 cable memory capacity
Raw Material Diameter Maximum 1.2 mm (0.047”)

Minimum 12 mm (0.47”)

Diameter Increments 0.01 mm (0.001”)
Strip Length Maximum 50 mm (1.96”)
Strip Length Increment 0.01 mm (0.001”)
Stripping Steps Maximum 6
Clamping Motor driven with programmable clamping force
Cycle Time ≥ 4 s (depending upon cable type and programming)
Production Rate 400 – 650 pcs/h (depending upon cable type and programming)
Memory Capacity 1000 cables
Interfaces 2x USB, 2x Ethernet, 2x SMI (Option)
Noise Level < 70 db (A)
Power Supply 100 – 240 VAC, 170 VA, 50/60 Hz
Compressed Air Connection 0.4 – 0.6 Mpa / 4 – 6 bar / 60 – 90 psi, 5 – 12 l/min
Dimensions (L x W x H) 585 x 182 x 370 mm (23 x 7.2 x 14.6”)
Weight 22 kg (48.5 lbs)
CE-Conformity The CoaxStrip 6480 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.