SemiRigid 1050 Technical Specification

Product Benefits

  • Extremely high precision
  • Easy-to-use interface and operation thanks to improved ergonomics
  • User-friendly high resolution colour touchscreen
  • Precise processing of semi-rigid coaxial cables
Raw Material Diameter Max. 4.50 mm (0.177”)

Min. 0.86 mm (0.86”)

Strip Length Maximum 30 mm (1.18”)
Increment Length: 0.01 mm (0.00039”) steps

Diameter: 0.01 mm (0.00039”) steps

Blade For turning and removing: 2pcs.

For turning: 2pcs. (1 each)

For pointing: 1 set (4 pcs.)

Cycle Rate > 3 s, (depending upon cable type and programming)
Memory Capacity 1,000 cables
Interfaces 2x USB “Host”, Footpedal, Ethernet (on request)
Noise Level < 70db (A)
Power Supply 100/115 VAC, 230/240 VAC, 150 VA, 50/60 Hz
Compressed Air Connection 6 bar / 0.6 MPa / 87 psi
Dimensions (L x W x H) 566 x 215 x 252 mm (22.3 x 8.5 x 9.9”)
Weight Net 19.5 kg (43 lbs)
CE-Conformity The SemiRigid 1050 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.