|
|
| Wire / Cable Types |
- stranded wire / cable
- solid wire / cable
- micro coaxial cable
- coaxial cable
- triaxial cable
- shielded cable
|
| Max. Cable Outer Diameter |
6.5 mm (0.26″) |
| Min. Conductor Diameter |
0.15 mm (0.006″) / AWG 36 |
| Diameter Increments |
0.01 mm (0.001″) |
| Cable Length |
| Standard mode: |
52 mm – 1000 m (2.05″ – 39,370″) |
| Short mode: |
< 52 mm (2.05″) |
|
| Max. Stripping Length |
| Left side: |
40 mm (1.57″) |
| Right side: |
999.9 mm (39.37″) |
|
| Max. Pull-Off Length |
| Left side: |
40 mm (1.57″) |
| Right side: |
40 mm (1.57″) |
|
| Length Increments |
0.1 mm (0.01″) |
| Transport Speed |
Up to 1.95 m/s (6.4 ft/sec) |
| Production Rate |
Approx. 900 cables / hour with a 3 step strip on both ends
(depending on cable type and programming) |
| Interfaces |
Wire markers, prefeeders, wire stackers, cable coilers, robotic interface, RS 232, CAN, parallel (Centronics) printer port |
| Air Pressure |
5 – 7 bar (75 – 90 psi) |
| Power Supply |
95 – 132 VAC / 190 – 264 VAC
47 – 64 Hz
600 VA |
| Noise Level |
< 75 db (A) |
| Dimensions (L x W x H) |
660 x 580 x 390 mm
(25.9″ x 22.8″ x 15.3”) |
| Weight |
Ca. 80 kg (154 lbs) |
| CE-Conformity |
The PowerStrip 9500 RX fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Note |
Specifications are subject |
