KM-CFK Technical Specifications

Product Benefits

  • reliable compacting process
  • very short cycle times
  • easy adjusting for various wire cross sections
  • quality assurance with automatic data storage (optional PC controller)
Back to Schleuniger KM-CFK
Cable Types stripped wire ends
Wire Cross Section 0.5 – 6 mm² (20 AWG – 10 AWG)
other cross sections available on request
Electric Supply 3 L/N/PE AC 400V
50 Hz (60 Hz optional)
32 A or 63 A
Max. Electrode Force 1800 N
Max. Welding Power 104 kVA
Sec. Off-Load Voltage 4 V
Max. Welding Current 20 kA
Sec. Short-Circuit Current 26 kA
Compressed Air min. 6 bar (87 psi), filtered and oil-free
Dimensions (L x W x H)
Compacting Station KM-CFK: 660 x 180 x 470 mm
(26” x 7.08” x 18.50”)
Control unit: 600 x 550 x 220 mm
(23.62” x 21.65” x 8.66”)
Cooling unit: 600 x 500 x 320 mm
(23.62” x 19.69” x 12.60”)

 
Weight
Compacting Station KM-CFK: approx. 90 kg (198.42 lb)
Control unit: 22 kg (48.50 lb)
Cooling unit: 42 kg (92.59 lb)

 
CE-Compatibility The KM-CFK fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger strongly recommends wire sampling for qualified testing of the compacting process. Please provide wire material for sampling.
Note Specifications are subject to change without notice. Exceptions may apply depending on wire and other variables.

 

Back to Schleuniger KM-CFK