KM-CFK Technical Specifications
Product Benefits
- reliable compacting process
- very short cycle times
- easy adjusting for various wire cross sections
- quality assurance with automatic data storage (optional PC controller)
Cable Types | stripped wire ends | ||||||
Wire Cross Section | 0.5 – 6 mm² (20 AWG – 10 AWG) other cross sections available on request |
||||||
Electric Supply | 3 L/N/PE AC 400V 50 Hz (60 Hz optional) 32 A or 63 A |
||||||
Max. Electrode Force | 1800 N | ||||||
Max. Welding Power | 104 kVA | ||||||
Sec. Off-Load Voltage | 4 V | ||||||
Max. Welding Current | 20 kA | ||||||
Sec. Short-Circuit Current | 26 kA | ||||||
Compressed Air | min. 6 bar (87 psi), filtered and oil-free | ||||||
Dimensions (L x W x H) |
|
||||||
Weight |
|
||||||
CE-Compatibility | The KM-CFK fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. | ||||||
Important Note | Schleuniger strongly recommends wire sampling for qualified testing of the compacting process. Please provide wire material for sampling. | ||||||
Note | Specifications are subject to change without notice. Exceptions may apply depending on wire and other variables. |