MINIC II Technical Specifications

Product Benefits

  • Reliable compacting (tip welding) of stripped wire ends
  • Possible to weld connections of copper and aluminium
  • Integrated good / bad sorting
  • Short cycle times
  • Low heat exposure of wire strands during compacting
Back to Schunk MINIC II

 

 

Wire Cross Section 0.22 – 6 mm² (23 AWG – 10 AWG)
other cross sections on request
Compacting Length 4 – 20 mm (0.16″ – 0.79″)
other lengths on request
Electric Supply 3 L/N/PE AC 400V (+/- 10%)
50/60 Hz
16 A
Compressed Air min. 6.5 bar, dry, filtered and oil-free
Dimensions (L x W x H)
MINIC II Compacting Station: 560 x 230 x 365 mm
(22.05″ x 9.06″ x 14.37″)
Control unit
(w/o monitor & keyboard):		 640 x 450 x 195 mm
(25.2″ x 17.72″ x 7.68″)

 
Approx. Weight
MINIC II Compacting Station: 26 kg (57.32 lb)
Control unit: 25 kg (55.12 lb)

 
CE-Compatibility The MINIC II fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger strongly recommends wire sampling for qualified testing of the compacting process. Please provide wire material for sampling.
Note Specifications are subject to change without notice. Exceptions may apply depending on application, wire and other variables.
Back to Schunk MINIC II