CoaxCenter 6000 Technical Specifications
Product Benefits
- Compact modular design with unbeatable precision
- QCam 360 automatically monitors the stripping quality
- Great flexibility with various processing stations
- Short changeover times with fast and simple machine set-up
- Simultaneous processing of both cable ends
| Raw Material Diameter | Maximum 5.5 mm (0.21”) |
| Conductor Cross-Section | 0.005 mm2 (40 AWG) |
| Workpiece Length | Minimum 15 mm (0.59”) + stripping lengths
Maximum 1000 mm (39.4”), longer cable length with active wire stacker possible* |
| Stripping Length | Minimum 0.1 mm (0.004”)
Maximum Side 1: 58mm (2.28”) Maximum Side 2: 38mm (1.49”) |
| Strip Length Tolerance | +/– 50 μm (depending on cable type and programming) |
| Measuring Precision | 10 μm |
| Production Rate | Cut & Strip: 1,200 pcs/h (100mm (3.93”) long, 3-step strip on both sides
Cut, Strip & Quality: 1000 pcs/h (100mm (3.93”) long, 3-step strip on both sides |
| Dimensions (L x W x H) | 1300 x 800 / 900 x 1,400 mm (51.18 x 31.49 / 35.53 x 55.11”)
(2,200 mm (86.61”) with lifted cover) |
| Weight | 407 kg (897 lbs) |
| Power Supply | 100/120 VAC, 200/240 VAC, 800 VA, 50/60Hz |
| Compressed Air Connection | 6 bar (87 psi) non-oiled, dried and filtered compressed air
Average 65 l/min, maximum 400 l/min Air hose 12/9 mm, max air hose length 10 meter |
| CE-Conformity | The CoaxCentre 6000 complies fully with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a parcticualr machine. * |
*depends on cable diameter and stiffness of the cable