| Wire / Cable |
All cables containing Kevlar strength member |
| Means of Cutting |
anvil and cutter |
| Max. Cable O.D. |
4.5 mm |
| Shortest Length of Remaining Kevlar |
3 mm |
| Max. Length of Remaining Kevlar |
60 mm |
| Max. Length of Kevlar to be Cut |
30 mm |
| Cycle Time |
> 3 sec. (depending on number of strokes) |
| Interfaces |
Foot pedal (included) |
| Power Supply |
100/115/230 VAC, 50 / 60 Hz
1000 VA Vacuum system (not included) |
| Compressed Air Requirement |
0.5 – 0.7 MPa (75 – 105 psi)
consumption: 0.12 l/stroke (0.01 ft³/stroke) |
| Dimensions (L x W x H) |
Cutting machine: 600 x 75 x 130 mm
Vacuum system (not included): Ø 200 x 500 mm |
| Weight |
Cutting machine: 3 kg
Vacuum system (not included): 6.5 kg |
| CE-Conformity |
The FiberOptic 7010 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Remarks |
It is recommended to use a vaccum cleaner (not included). |
| Note |
Specifications are subject to change without notice. Exceptions may apply depending on application, wire and other variables. |
