Schleuniger CrimpCenter 67 HD16

Product Benefits

  • Production of larger cables up to 16 mm² (6 AWG)
  • High performance and short setup times
  • Simple operation with state-of-the-art software and touchscreen
  • Easy network integration
  • Wide range of options and accessories available

Get A Brochure

    Your Name (required)

    Telephone (required)

    Company (required)

    Your Email (required)

    Technical Specification

    See Technical Spec

    Fully Automatic Crimping Machine with 4 Stations

    The CrimpCenter 67 HD16 is a fully automatic swivel arm crimping machine with up to 4 processing stations. It is ideally suited for medium to large cable applications from typically 6 to 16 mm² (10 – 6 AWG). At a maximum feed rate of up to 12 m/s (39.4 ft/s), this versatile fully automatic crimping machine allows high-quality crimping, sealing and twisting of wires at maximum productivity.

    Heavy Duty

    Large cable dimension processing requires a rugged system design with reliable and suitable equipment. Therefore the CrimpCenter 67 HD16 – HD stands for “heavy duty” – is equipped with up to two powerful presses: the UniCrimp 500 A crimping press is specially designed for medium to large cables up to 16 mm² (6 AWG) with a unique knee lever drive providing excellent press force dynamics of up to 49 kN.

    Schleuniger also offers adequate HeavyCrimper crimp applicators for larger cross sections available as pneumatic rear-feed or side-feed version. For optimized prefeeding from large and heavy coils, we recommend the Schleuniger PreFeeder 4600 and PreFeeder 4700. These high-end feeding systems allow handling of cable spools up to 600 kg (1.334 lbs.) or 1’000 kg (2’222 lbs.) respectively.

    A large variety of configuration options makes the CrimpCenter 67 HD16 one of the most flexible machines in its class. From Seal to Seal applications to twisting or doubling crimp applications; the flexible platform of the CrimpCenter 67 HD16 can be configured according to your production requirements.

    Configuration Possibilities

    The CrimpCenter 67 HD16 incorporates state of the art techology in precision mechanics, electronics, software and networking. Highest output rates, short setup times and industry standard setting user-friendliness in both operation and maintenance make the CrimpCenter 67 HD16 a new generation of heavy cut strip terminate (CST) machine.

    measure & cut to length
    length encoder
    horizontal and vertical wire straightener
    full strip both sides
    2 step strip both sides
    partial strip both sides
    Crimp to Crimp
    (crimping of both wire ends)
    Crimp to Seal
    Seal to Seal
    (crimp and seal both wire ends)
    Twist to Crimp
    Twist to Seal
    Doubling Crimp
    (same terminal on both wire ends)
    Doubling Crimp with Seal
    (same terminal & seal on wire ends)
    programmable horizontal and vertical doubling
    Integrated crimp force monitoring *
    (with UniCrimp 500 A crimping station)
    good / bad sorting
    wire list processing
    (sequencing)
    window strip*
    splice detection *
    pull-out force measuring*
    (pullforce measuring)
    crimp height measuring*
    inkjet wire printing / marking*
    network integration*
    Seal scan*
    Barcode scan*

    *optional

    A wide range of options allow you to further enhance the processing capabilities or customize the fully automatic crimping machine (CST) to your specific needs.

     

    Back to Cut, Strip and Terminate Machines